skip to main text

Specifications

General Specifications

Printing resolution (dpi)

4800* (horizontal) x 1200 (vertical)

* Ink droplets can be placed with a pitch of 1/4800 inch at minimum.

Interface

USB Port:

Hi-Speed USB

* A computer that complies with Hi-Speed USB standard is required. Since the Hi-Speed USB interface is fully upwardly compatible with USB 1.1, it can be used at USB 1.1.

Print width

8 inches/203.2 mm

(for Borderless Printing: 8.5 inches/216 mm)

Printable area

Borderless printing: Top/Bottom/Left/Right margin: 0.0 inch (0.0 mm)

Standard printing:

-Top margin:

  • 0.12 inches (3.0 mm)

-Bottom margin:

  • 0.20 inches (5.0 mm)

-Left margin:

  • Letter: 0.26 inches (6.4 mm)
  • Other sizes: 0.14 inches (3.4 mm)

-Right margin:

  • Letter: 0.25 inches (6.3 mm)
  • Other sizes: 0.14 inches (3.4 mm)
Operating environment

Temperature: 41 to 95 °F (5 to 35 °C)

Humidity: 10 to 90 % RH (no condensation)

* The performance of the printer may be reduced under certain temperature and humidity conditions.

Recommended conditions:

Temperature: 59 to 86 °F (15 to 30 °C)

Humidity: 10 to 80 % RH (no condensation)

* For the temperature and humidity conditions of papers such as photo paper, refer to the paper's packaging or the supplied instructions.

Storage environment

Temperature: 32 to 104 °F (0 to 40 °C)

Humidity: 5 to 95 % RH (no condensation)

Power supply

AC 100-240 V, 50/60 Hz

(The supplied power cord is only for the country or region you purchased.)

Power consumption

Printing: Approx. 10 W *1

Standby (minimum): Approx. 1.2 W *1*2

Standby (all ports connected): Approx. 0.9 W

OFF: Approx. 0.2 W

*1 USB connection to PC

*2 The wait time for standby cannot be changed.

External dimensions

Approx. 16.8 (W) x 10.1 (D) x 5.2 (H) inches

Approx. 426 (W) x 255 (D) x 131 (H) mm

* With the Paper Support and Paper Output Tray retracted.

Weight

Approx. 5.5 lb (Approx. 2.5 kg)

* With the FINE Cartridges installed.

Canon FINE Cartridge Total 1280 nozzles (BK 320 nozzles, C/M/Y each 320 nozzles)

Minimum System Requirements

Conform to the operating system's requirements when higher than those given here.

Windows

Operating System

Windows 10, Windows 8.1, Windows 7 SP1

Note: Operation can only be guaranteed on a PC with pre-installed Windows 7 or later.

.NET Framework 4.5.2 or 4.6 is required.

Hard Disk Space

3.1 GB

Note: For bundled software installation.

The necessary amount of hard disk space may be changed without notice.

Display XGA 1024 x 768

macOS

Operating System OS X 10.10.5 - OS X 10.11, macOS 10.12
Hard Disk Space

1.5 GB

Note: For bundled software installation.

The necessary amount of hard disk space may be changed without notice.

Display XGA 1024 x 768
  • This printer cannot be used with the iOS and Android.
  • Internet connection or CD-ROM drive is required to install the software for Windows.
  • Internet connection is required to use Easy-WebPrint EX and all the user's guide.
  • Easy-WebPrint EX: Internet Explorer 8, 9, 10 and 11* (for Windows) is required.
  • Windows: Some functions may not be available with Windows Media Center.
  • macOS: For macOS, an internet connection is required during software installation.

Information in this guide is subject to change without notice.